OUR BEST SELLER
The Lawless diver's watch is becoming a real classic. Due to the high demand, we now also offer the watch with a smaller diameter. We immediately used that to improve the Lawless again. The new bezel now has screws for easy service. The bezel inlay is made of sapphire and all digits and lines glow in the dark. The steel bracelet is even better integrated into the case, and the engraving on the back is not as deep.
Specifications:
manufactured watch case
40 mm diameter
11.8 mm height (incl. slightly domed glas)
47.1 mm lug to lug
73 g weight without band
148 g weight incl. 20/18 steel bracelet
domed and interior anti-reflective sapphire crystal
screw-down crown with logo
unidirectional rotating sapphire bezel with 120 ratchet
drilled lugs (width inside lugs 20 mm)
dial with applied appliqués (high-quality dial from one of the best dial-manufactories in Germany)
white and black lacquered hands (Swiss Made)
BGW9 Superluminova (best Swiss quality, blue light)
Swiss made ETA 2824-2 TOP GRADE automatic movement (adjusted in 5 positions)
Precision between -1/+6 sec/day (after casing)
Highest possible quality with Chronometer balance
28.800 A/h beat, 25 Jewels, 42 h power reserve
anti-magnetic according to DIN standard 8309
shock-proof according to DIN standard 8308
pressure resistant up to 20 ATM pressure (water density according to DIN 8310)
steel bracelet with folding clasp or rubber strap
stainless steel buckle
high quality leather box
.
**** shipping free worldwide ***
Delivery time within 4 weeks
Price (NET excluded VAT):
Lawless 40 Black Top Grade with bracelet 20/18 mm * 1,550.00 Euros
Lawless 40 Black RED EDITION Top Grade with bracelet 20/18 mm * 1,750.00 Euros
Extras:
rubber strap or deployant buckle * from + 50.00 Euro
OUR BEST SELLER
Our Lawless diver's watch has developed from an insider tip to a real alternative in recent years. In the meantime, this model enjoys a certain level of awareness on the market and, above all, has a high recognition value due to the very individual design of the dial and hands.
We use the new bezel system with screws for the Lawless 40. In the past there were always problems with later repairs, since most bezels could no longer be pried off. With the new system, it's easy. This means that we can continue to repair or replace the bezels in the future if necessary.
The steel bracelet is equipped with an adjustable folding clasp. Actually designed for divers so that the watch can be worn over the diving suit, the clasp also proves to be very functional in everyday use. You can use the clasp to enlarge or reduce the watch without having to take it off your arm.
The dials of the Lawless diver's watch line are something very special. They are made in a well-known German dial manufacturer exclusively for Tourby Watches. The hour markers are applied. These so-called "appliquès" are varnished by hand and then placed on the dial. The holes for the feet of the appliqués are set up on the sheet beforehand. This work requires a lot of care and time. Therefore, such dials are much more expensive than simple, printed dials. The surface of the dial says a lot about its quality. Tourby uses the "galvano" finish for the black dials. This finish is matt and has a very fine grain. The blue dials are even more elaborate, as they have a "sunburst" that spreads from the center of the dial to the edge. This creates beautiful light effects, where the sheet becomes lighter or darker in some places if you turn the sheet back and forth.
The bezels of the Lawless line are also very special. The teeth are very fine and make them look very elegant. Inside is a ratchet system with 120 notches, which makes turning the bezel much easier and smoother. The bezel inlays are made of real sapphire glass. They look very elegant and have the advantage that the numbers and lines glow in the dark. This only works with sapphire glass bezels, because the luminous material is attached to the back of the glass in a mirror-inverted manner. Tourby is probably the only watch company that doesn't glue the bezels on until after the watches are assembled themselves. Normally, the bezel inserts are glued on by the case manufacturer directly after production. So you get the case delivered complete with bezel. Unfortunately, you can't be sure that the bezels are exactly straight to the dial. You can only see this when the complete watch is assembled. Therefore, unfortunately, it often happens that the triangle on the bezel does not sit linearly with the dial. Tourby only glues the bezel inlays in after the watch is finished. So you can fix the bezels all linear to the dial.
Even if it looks less professional on a official website, you can only see the quality of the watches from live-pictures. All watches look great on official product images. Even the cheap ones. But in order to get an accurate feeling of the watches, you have to hold them in your hand. These often have a completely different effect. However, since our customers mostly order online and cannot view the watches beforehand, our pictures must be as authentic as possible.
Please click on the pictures below to see two videos of Lawless 40 on our instagram page:
Review from UNDESEA-TIME in Italian Language